• Hybrid Design!

• Built using a mix of Alnico 2 and 5 rod magnets. Alnico 5 is used on the 3 lower pitched strings. Alnico 2 is used on the 3 higher pitched strings

• The weaker alnico 2 magnets under the high strings can smooth out some of the harshness. While the alnico 5 in the lower strings retains the tightness where it's needed most 

Tech Specs

• 42 AWG pure copper wire in the bridge position

• 43 AWG pure copper wire in the neck position

• ALNICO 5 + ALNICO 2 rod magnets

• Push-back cloth leads with 22 AWG pre-tinned wire for easy installation

• Lightly potted in beeswax and paraffin

• Copper-clad steel baseplate

• Chrome cover

• Resistance Bridge: ~7.2kOhm*

• Resistance Neck: ~7.6kOhm*

• 50mm string spacing in the neck

• 54mm string spacing in the bridge

• Bridge pickup is wrapped in string, just like the originals.

Stratocaster®, Strat®, and Fender® are registered trademarks of Fender Musical Instruments Corporation (FMIC). Pickup Pickups is not affiliated with or endorsed by FMIC and we do not sell products made or authorized by FMIC.